PAS-225VPB OPERATION© 3/2014 ECHO Inc.X7722275204 17Storage - Fuel storage laws vary by locality. Contact your local government for the laws affecting your area.As a precaution, store fuel in an approved, airtight container. Store in a well-ventilated, unoccupied building,away from sparks and flames.Stored fuel ages. Do not mix more fuel than you expect to use in thirty (30) days, ninety (90) days when afuel stabilizer is added.Stored two-stroke fuel may separate. ALWAYS shake fuel container thoroughly before each use.Operation With BladesBlade use DEMANDS specific Brush Cutter configuration. Operation without specified shield, barrierbar or U-handle, and harness can result in serious personal injury. Follow installation instructions.DO NOT INSTALL BLADES ON GT (CURVED SHAFT) MODEL TRIMMERS.• Arbor Diameter of Upper Blade Plate must match arbor diameter of blades.• New cotter pin required each time blade is installed.• Brush cutters over 16.5 lbs (7.5 kg) dry weight (weight w/o fuel) require a double shoulder harness.Note: The Barrier Bar is used to restrict rearward movement of the unit. The Barrier Bar is NOT A HANDLEand should not be gripped when using or carrying the unit.Blade SelectionThe type of Blade used MUST be matched to the type and size of material cut. An improper or dullblade can cause serious personal injury. Blades MUST be sharp. Dull blades increase the chance ofkick-out and injury to yourself and bystanders.TO USETHESEBLADESPro Maxi-CutGrass/WeedBladeRigid PlasticTri-CutGrass/Weed BladeMetal BladeYoumustinstalltheseparts!Support Handle, w/orw/o Barrier BarU-Handle or SupportHandlew/Barrier BarU-Handle or SupportHandlew/Barrier BarPlastic Shield Plastic Shield Metal ShieldHarness Harness HarnessUpper Plate &Flat WasherUpper Plate& Glide CupUpper/LowerBlade PlatesHex Nut Hex Nut Hex NutNew Cotter Pin New Cotter Pin New Cotter Pin