PAS-225VPB MAINTENANCE© 3/2014 ECHO Inc.X7722275204 29Nylon Line ReplacementWear Gloves or personal injury may result:• Cutoff knife is sharp.• Gearcase and surrounding area may be hot.1. Cut one piece of line to recommended length..080 (2.0 mm) dia. – 20’ (6 m).095 (2.4 mm) dia. – 20’ (6 m)2. Align arrows on top of knob with openings in eyelets.3. Insert one end of trimmer line into an eyelet, and push lineequal distance through trimmer head.4. Hold trimmer head while turning knob clockwise to wind lineonto spool until about 5” (13 cm) of each line remainsexposed.Trimmer head is now fully loaded and ready for operation.When the wear indicators located at the bottom of theSpeed-Feed® head are worn smooth, or if holes appear,replacement of the cover or the entire Speed-Feed® head isrequired.For more informationscan this QR code.Wear Indicators