G RASS TRIMMER /BRUSH C UTTEROPERATOR 'S MANUAL 3PERSONAL CONDITION AND SAFETY EQUIPMENTINTERNATIONAL SYMBOLSIMPORTANTThe enclosed message providesinformation necessary for the protec-tion of the unit.NOTEThis enclosed message provides tipsfor use, care and maintenance of theunit.Throughout this manual and on the product itself, you will find safetyalerts and helpful, informational messages preceded by symbols or keywords. The following is an explanation of those symbols and keywords and what they mean to you.SAFETYMANUAL SAFETY SYMBOLS AND IMPORTANT INFORMATIONThis symbol accompanied by the words WARNING andDANGER calls attention to an act or condition that can leadto serious personal injury to operator and bystanders.The circle with the slash symbol means whatever is shownwithin the circle is prohibited.HotSurfaceCarburetorAdjustment- Idle speedCarburetorAdjustment- High speedmixtureDESCRIPTION SYMBOLSYMBOL"WARNING, SEEOPERATOR'SMANUALWear eye, earand headprotectionEmergencyStopFuel and oilmixtureFinger SeveringCarburetorAdjustment- Low speedmixturePrimerBulbIgnitionON/OFFWear hand andfoot protectionSafety/AlertKeep bystanders and helpersaway 15 m (50 ft.).DO NOT smokenear fuel.DO NOT allowflames or sparksnear fuel.DESCRIPTION SYMBOL DESCRIPTION SYMBOL DESCRIPTIONChoke Control"Cold Start"Position(Choke Closed)Choke Control"Run"Position(Choke Open)Do not useblades. Stringline onlyWARNING DANGERUsers of this product risk injury to themselves and others if the unit is used improperly and/or safety precautionsare not followed. Proper clothing and safety gear must be worn when operating unit.