16 Rev 0.0USER INSTRUCTIONSEN3.2.2 Selecting and starting the programPress the• program selection button (ref. 3 fi g. 3-02) several times untilthe indicator light corresponding to the required program turns on (ref. 2 fi g.3-02);if required, press the relative buttons to select any complementary functions•(e.g.: “half-load”, “program delay”; see para 3.2.7 “options”);close the door; the program will start after about• 2 seconds and the relativeindicator light will fl ash throughout the cycle (program running signal).If the door of the dishwasher has not been closed or has been incor-rectly closed, the washing cycle will not begin.SUPPLEMENTARY PROGRAMSThe supplementary program button (ref. 6 fig. 3-02) adds five extra programsto the ones that can be directly selected with the program selection button.Press the supplementary program button (the indicator light turns on) afterselecting the “main” program (see 1, 2, 3, 4, 5 in table. 3-02a).As the function is memorized, press the button again (the indicator light turnsoff) if you wish to run one of the 5 main programs for the next cycle.3.2.3 End of programThe end of the program is signaled by a short beep. Additionally the indicatorlight of the standard and supplementary programs (marked “end”) fl ash.3.2.4 Interrupting a programTo interrupt the current program simply open the door of the dishwasher; torestart the program, simply close the door again. The program restarts fromwhere it was interrupted.3.2.5 Changing the current programTo change the current program, simply open the door of the dishwasher andselect the new program. Close the door to run the new program automatical-ly.
