Rev 0.0 17USER INSTRUCTIONS EN3.2.6 Canceling the current programTo cancel the current program, open the door and press and hold down•the program selection button (ref. 3 fi g. 3-02) for a few seconds until theindicator lights of the fourth and fi fth programs turn on (ref. pr. 4, pr. 5 fi g.3-03).Close the door again.•After about 1 minute, the dishwasher terminates the cycle and the indica-•tor lights of the fourth and fi fth programs (ref. pr. 4, pr. 5 fi g. 3-03) startfl ashing.pr. 4 pr. 5AUTO3.2.7 OptionsHALF-LOADThis option is particularly suitable for reduced loads and saves on water andelectricity.Before selecting the half-load wash option, open the dishwasher door andchoose the required washing program (see para 3.2 “Setting the washing pro-gram and switching it on and off”).The half-load wash cycle can be selected in two different ways using the half-load wash button (ref. 9 fi g. 3-02):press the button• once to select washing in the upper rack. This is confi r-med by the appropiate indicator light (ref. 10a fi g. 3-02);press the button• twice to select washing in the lower rack. This is confi r-med by the appropiate indicator light (ref. 10b fi g. 3-02);press the button• three times to return to the standard full load condition(washing in both racks, both indicator lights off).When washing with just the lower rack is selected, the cutlery basket canbe separated and just half used.FIG. 3-03
