Rev 0.0 23USER INSTRUCTIONS EN6 TROUBLESHOOTINGThe dishwasher can to signal a number of malfunctions by turning on variousindicator lights, as described below (see following table):FAULT DESCRIPTIONE1 AUTOAcquastop failureThe anti-flooding system has tripped (only for modelsfitted with this feature). Activates in case of water leaks.Contact the technical assistance center.E2 AUTOSafety levelThe system limiting the water level in the dishwasherhas tripped. Interrupt the current program. Switch offthe dishwasher, switch it back on again, program a newcycle and press start. If the problem persists, contactthe technical assistance center.E3 AUTOWater heating malfunctionThe water is not heated or is incorrectly heated. Repeatthe washing program; if the problem persists, contactthe technical assistance center.E4 AUTOWater temperature monitoring malfunctionInterrupt the current program. Switch off the dishwasher,switch it back on again, program a new cycle and pressstart. If the problem persists, contact the technicalassistance center.E5 AUTOWater intake malfunctionThe appliance does not take in water or does soincorrectly. Make sure the water connections arecorrect, that the water supply tap is open and that thefilter is not clogged. If the problem persists, contact thetechnical assistance center.Table 6-01a
