Falcon 110 Dual Fuel User Manual & Installation & Service Instructions

Also see for Classic 110 Dual Fuel: User guide & installation & service instructions User's guide & installation instructions User guide User's guide & installation instructions User's guide & installation instructions

Falcon 110 Dual Fuel User Manual & Installation & Service Instructions Manual pdf 13 page image

11AustraliaAccessoriesOven ShelvesIn addition to the flat shelves (Fig.2-35), some models aresupplied with a drop shelf (Fig.2-36). The drop shelf increasesthe possibilities for oven shelf spacing.The oven shelves can be easily removed and refitted.Pull the shelf forward until the back of the shelf is stopped bythe shelf stop bumps in the oven sides (Fig.2-37).Lift up the front of the shelf so the back of the shelf will passunder the shelf stop and then pull the shelf forward(Fig.2-38).To refit the shelf, line up the shelf with a groove in the ovenside and push the shelf back until the ends hit the shelf stop.Lift up the front so the shelf ends clear the shelf stops, andthen lower the front so that the shelf is level and push it fullyback (Fig.2-39).The Handyrack (Main Oven)The Handyrack (Fig.2-40) fits to the left-hand oven dooronly. Food cooking on it is easy to attend to, because it isaccessible when the door is open.The maximum weight that can be held by the Handyrack is5.5kg (12lb). It should only be used with the supplied roastingtin, which is designed to fit the Handyrack. Any other vesselcould be unstable.Additional roasting tins are available from our cookwarecollection – Part Code RM027.It can be fitted at two different heights. One of the ovenshelves must be removed and the other positioned to suit.When the Handyrack is used in its highest position, otherdishes can be cooked on the bottom shelf position or base ofthe oven.When the Handyrack is used in its lowest position, otherdishes can be cooked on the second shelf position or base ofthe oven.To fit the Handyrack, locate one side of it on the door bracket(Fig.2-41).Then spring the other side out to clip it onto the otherbracket (Fig.2-42).ArtNo.320-0010 Flat & drop shelves��ArtNo.320-0013 Removing the shelf 3ArtNo.320-0014 Handyrack on LH doorArtNo.320-0015Fitting the Handyack 1Fig.2-40Fig.2-41ArtNo.320-0016Fitting the handyrack 2Fig.2-42Fig.2-36ArtNo.320-0011 Removing the shelf 1 ArtNo.320-0012 Removing the shelf 2Fig.2-37 Fig.2-38Fig.2-39A - Flat shelf, B - Drop shelf