Falcon Classic 110 Dual Fuel User's Manual & Installation Instructions

Also see for Classic 110 Dual Fuel: User guide & installation & service instructions User guide & installation & service instructions User's guide & installation instructions User guide User's guide & installation instructions

Falcon Classic 110 Dual Fuel User's Manual & Installation Instructions Manual pdf 12 page image

8ArtNo.302-0001 - 6-button clockArtNo.302-0003 - 6BCminute minder setting 1 ArtNo.302-0004 -Minute minder setting 2ArtNo.302-0005 -6BC Stopping the oven 1ArtNo.302-0002 - 6BC annotatedA B C D E FArtNo.302-0005a -6BC Stopping the oven 1aArtNo.302-0006 - 6BCsetting the cook timeArtNo.302-0006 - 6BCsetting the cook timeArtNo.302-0005 -6BC Stopping the oven 1ArtNo.302-0005a -6BC Stopping the oven 1aA – Minute minder, B – ‘Cook’ time, C – ‘Stop’ time, D – Manual,E & F – Time setting buttonsFig.2-21Fig.2-22Fig.2-27 Fig.2-28Fig.2-29 Fig.2-30Fig.2-23 Fig.2-24Fig.2-25 Fig.2-26The ClockYou can use the timer (Fig.2-21) to turn the ovens on and off.The clock must be set to the time of day before the ovens willwork.Setting the Time of DayWhen the clock is first connected the display flashes ( 0.00 )and () alternately.Press and hold both the [] and [] buttons down(Fig.2-22). Now press the [+] button (or the [–] button) untilthe correct time shows.Do not forget that it is a 24-hour clock.If you need to reset the cooker, turn off the power supply andwait for a couple of minutes and start again.Minute MinderPress and hold the [] button (Fig.2-23), and then press the[+] button until the length of time you want to cook for isshown (Fig.2-24).You can check the time remaining by pressing []. When thebeeper sounds cancel it by pressing [].• The ‘cook period’, which is the length of time youwant the oven to cook for.• The ‘stop time’, which is the time of day you want theoven to stop cooking.To Stop the Ovens AutomaticallyPress and hold the ‘stop time’ [] button (Fig.2-25) and thenpress the [+] button (or [–] button) until the required ‘stoptime’ shows (Fig.2-26). AUTO will show in the display.Once the ‘stop time’ is reached, the beeper sounds. To stop thebeep turn the oven control knob to 0 first and then press []once; press [] again to return to manual cooking.To Start and Stop the Ovens AutomaticallyBefore you set the clock you must have two numbers clearlyin mind – the ‘cook period’ and the ‘stop time’.Note: You cannot set a start time directly – this is setautomatically by setting the ‘cook period’ and the ‘stop time’.Press and hold the [] button (Fig.2-27) and then press the[+] button (or [–] button) until the required ‘cook period’ shows(Fig.2-28).Now press and hold the [] button (Fig.2-29) and then pressthe [+] button (or [–] button) until the required ‘stop time’shows (Fig.2-30). Release the buttons.AUTO will now show in the display.Set the oven(s) to the required temperature. When cooking isfinished the beeper will sound. Turn the oven knob(s) to theOFF position first, and then press the [] button once to stopthe beep; press it again to return to manual cooking.If you are out, do not worry about the beeper going off, itstops after a while. When you return, turn the oven knob(s) to0 first, and then press [] twice to return to manual cooking.