Falcon Classic 110 Dual Fuel User's Manual & Installation Instructions

Also see for Classic 110 Dual Fuel: User guide & installation & service instructions User guide & installation & service instructions User's guide & installation instructions User guide User's guide & installation instructions

Falcon Classic 110 Dual Fuel User's Manual & Installation Instructions Manual pdf 17 page image

13ArtNo.311-0032 Burner layout FSDABCD EArtNo.311-0033 Wok burner details FSDABCDEArtNo.311-0016 Fitting the burner inner headABFig.5-1Fig.5-2Fig.5-3Fig.5-4A – Cap, B – Head, C – Notch, D – Base , E – ElectrodeA – Inner burner cap, B – Outer burner cap, C – Inner burner head,D – Outer burner head, E – Wok burner baseA – Electrode notch, B – Ignition electrode5. Cleaning Your CookerIsolate the electricity supply before carrying out anythorough cleaning. Allow the cooker to cool.nn NEVER use paint solvents, washing soda, causticcleaners, biological powders, bleach, chlorine basedbleach cleaners, coarse abrasives or salt.nn DO NOT mix different cleaning products – they mayreact together with hazardous results.All parts of the cooker can be cleaned with hot soapy water– but take care that no surplus water seeps into theappliance.Remember to switch on the electricity supply and reset theclock before re-using the cooker.Hotplate BurnersThe burner heads and caps can be removed for cleaning.nn DO NOT put the burner heads in a dishwasher.Make sure they are absolutely dry before replacing them.The Single Ring BurnersWhen refitting the burner head, make sure that the notchlines up with the electrode or hole in the base. Check that theburner head is level and that the cap is fitted centrally on theburner head (Fig.5-1).The Wok BurnerWhen reassembling the wok burner (Fig.5-2), turn over thelarge base ring and find the ‘D’ shaped area (Fig.5-3). Turn thehead until the ‘D’ matches the one on the burner base. Flipthe burner over once again and place it on the burner base.To fit the small inner burner, find the larger electrode notch inthe burner rim. Line this up with the white ignition electrodeand place the inner burner on the large base ring (Fig.5-4).Now fit the two burner caps, making sure that they are seatedproperly.Check the burner ports are not blocked. If a blockage occurs,remove stubborn particles using a piece of fuse wire.The Wok CradleRecommended cleaning materials are hot soapy water, amoistened soap pad, cream cleaner or a nylon scourer.The GriddleAlways clean the griddle after use. Allow it to cool completelybefore removing. Immerse the griddle plate in hot soapywater. Use a soft cloth or, for stubborn stains, a nylon washingup brush.Note: If the griddle is washed in a dishwasher then somedishwasher residue may appear on the back. This is normaland will not affect the performance of your griddle.