Falcon Classic 110 User's Manual & Installation Instructions

Also see for Classic 110 gas: User guide User guide User's guide & installation instructions

9Low Temperature Setting, L1/L2nn This function should only be used when heatingfrom coldEach cooking area is equipped with 2 low temperaturesettings:• L1 will maintain a temperature of about 40 °C – ideal forgently melting butter or chocolate.• L2 will maintain a temperature of about 90 °C – ideal forsimmering (bring the pan to the boil and then select L2to keep soups, sauces, stews, etc at an optimal simmer).The maximum time these settings can be used is 2 hours,after which the hob will switch off automatically. If required,you can immediately restart the Low Temperature function byreactivating L1 or L2. To increase the heat, just turn the controlknob to the required level.The maximum times for all other power levels are shown inTable 2.3.Power Boost Setting, PAll of the induction cooking zones have Power Boostavailable, activated by turning the control knob clockwiseuntil [P ] is shown on the hob control display.Power Boost allows additional power to be made available foreach of the cooking zones. This is useful to bring a large panof water to the boil quickly.The Power Boost function operates for a maximum of 10minutes on each zone, after which the power is automaticallyreduced to setting 9.When using the Power Boost function, the cooking zones arelinked.Fig. 2.8 shows the hob layout. Zones A and B are linkedtogether as are zones C, D and E.This means that when using zone A on Power Boost and thenswitching zone B to Power Boost , the power to zone A willreduce slightly. The last zone switched to Power Boost alwaystakes priority. Zones C, D and E work in the same way.nn This is a built-in safety device.Deactivate the Power Boost function by turning the controlknob to a lower setting.Overheat FunctionThis function identifies when the temperature of the pan risesrapidly and works to maintain a safe level of pan temperature.It should not interfere with normal cooking.Cookware with bases that become distorted (Fig.2-2) whenheated may interfere with the operation of the OverheatFunction. This may result in damage to your cookware orInduction Glass Hob.Please read and follow the manufacturers’ instructionscarefully before using cookware on your induction hob.InductionA B CD EA & B linkedC, D & E linkedArtNo.051-0002 - Min pan diameterPower Level Maximum Operating Time2 hours6 hours6 hours5 hours5 hours4 hours1.5 hours1.5 hours1.5 hours1.5 hours10 minutesL1 and L2123456789Power BoostTable 2.3Fig. 2.8