Falcon Classic 110 User's Manual & Installation Instructions

Also see for Classic 110 gas: User guide User guide User's guide & installation instructions

33INSTALLATIONCheck the appliance is electrically safe when you have ffnished.Fixed Wiringnn Disconnect from the mains supply.For connection to fixed wiring, i.e. flexible conduit, removethe electrical terminal cover on the back panel (Fig. 7.13).Fit the conduit box to the cooker using the two M5 screwfittings located at the top of the box. Remove the M4 screwfrom the base, and fix to the cooker, via the fitting throughthe back of the conduit box (Fig. 7.14).The conduit box cover is reversible. Fit the reducer plate ifrequired (Fig. 7.15). Feed the cable through the conduit boxand secure in place with the cable clamp.Connect the mains cable to the correct terminals for yourelectrical supply type (Fig. 7.16). Check that the links arecorrectly fitted and that the terminal screws are tight.Fit the cover to the conduit box.Conduit boxM4 screwM5 screwsReducer plates Reversible conduit box coverArtNo.132-0002 - 3 phase 240/415Vac 50Hz3-phase 400 VAC 50 HzFig. 7.13Fig. 7.14Fig. 7.15Fig. 7.16