Falcon Classic 90 Gas User's Manual & Installation Instructions

Also see for Classic 90 Gas: User guide User's guide & installation instructions Instructions for use and installation

INSTALLATIONCheck the appliance is electrically safe and gas sound when you have finished.21Checking the Parts:You will need the following equipment to complete thecooker installation satisfactorily:• Stability bracket: If the cooker is to be supplied withgas through a flexible hose, a stability bracket or chainMUST be fitted.These are not supplied with the cooker but areavailable at most builders’ merchants.• Gas pressure tester/manometer.• Flexible gas hose: Must be in accordance with therelevant standards.• Multimeter: For electrical checks.You will also need the following tools:1. Electric drill2. Masonry drill bit (only required if fitting the cooker on astone or concrete floor)3. Wall plugs (only required if fitting the cooker on a stoneor concrete floor)4. Steel tape measure5. Cross head screwdriver6. Flat head screwdriver7. Spirit level8. Pencil9. Adjustable spanner10. Allen keys11. Screws for fitting stability bracket12. 13 mm spanner (or socket wrench)3 pan supports SplashbackArtNo.000-0001 90 Pan supportsArtNo.421-0002 - SplashbackGriddle Grill pan & trivetArtNo.330-0002 - Grill pan w handle2 flat shelves HandyrackArtNo.324-0003 HandyrackRoasting tin Tall oven shelves and shelfsupportsArtNo.324-0004 Roasting tinArtNo.000-0010 Tall oven shelvesHandles (Classic only) PlinthArtNo.210-0014 - Classic handles