Falcon Classic Deluxe 110 Dual Fuel User's Manual & Installation Instructions

Also see for Classic Deluxe 110 Dual Fuel: User guide & installation & service instructions

Falcon Classic Deluxe 110 Dual Fuel User's Manual & Installation Instructions Manual pdf 13 page image

11ArtNo.302-0002 - 6BC annotatedA B C D E FArtNo.302-0001 - 6-button clockThe ClockYou can use the timer to turn the left-hand multi-functionoven on and off. The clock must be set to the time of daybefore the ovens will work.Setting the Time of DayThe 6-button LCD clock is shown in Fig.2-28. When theclock is first connected the display flashes ( 0.00 ) and (G)alternately.Press and hold both the [C] and [D] buttons down(Fig.2-29). Now press the [+] button (or the [–] button) untilthe correct time shows.Do not forget that it is a 24-hour clock.If you need to reset the cooker, turn off the power supply andwait for a couple of minutes and start again.Setting the Minute MinderPress and hold the [C] button (Fig.2-30), and then press the[+] button until the length of time you want to cook for isshown (Fig.2-31).You can check the time remaining by pressing [C]. When thebeeper sounds cancel it by pressing [C].• The ‘cook period’, which is the length of time youwant the oven to cook for.• The ‘stop time’, which is the time of day you want theoven to stop cooking.To Stop the Oven AutomaticallyPress and hold the ‘stop time’ [E] button (Fig.2-32) and thenpress the [+] button (or [–] button) until the required ‘stoptime’ shows (Fig.2-33). AUTO will show in the display.Once the ‘stop time’ is reached, the beeper sounds. To stop thebeep turn the oven control knob to 0 first and then press [B]once; press [B] again to return to manual cooking.To Start and Stop the Oven AutomaticallyBefore you set the clock you must have two numbers clearlyin mind – the ‘cook period’ and the ‘stop time’.Note: You cannot set a start time directly – this is setautomatically by setting the ‘cook period’ and the ‘stop time’.Press and hold the [D] button (Fig.2-34) and then press the[+] button (or [–] button) until the required ‘cook period’ shows(Fig.2-35).Now press and hold the [E] button (Fig.2-36) and then pressthe [+] button (or [–] button) until the required ‘stop time’shows (Fig.2-37). Release the buttons.AUTO will now show in the display.Set the oven to the required temperature. When cooking isfinished the beeper will sound. Turn the oven knob to the OFFposition first, and then press the [B] button once to stop thebeep; press it again to return to manual cooking.If you are out, do not worry about the beeper going off, itstops after a while. When you return, turn the oven knob to 0first, and then press [B] twice to return to manual cooking.ArtNo.302-0004 -Minute minder setting 2Fig.2-28ArtNo.302-0005 -6BC Stopping the oven 1Fig.2-29ArtNo.302-0003 - 6BCminute minder setting 1Fig.2-30 Fig.2-31Fig.2-32Fig.2-35Fig.2-36 Fig.2-37A – Minute minder, B – ‘Cook’ time, C – ‘Stop’ time,D – Manual, E & F – Time setting buttonsArtNo.302-0005a -6BC Stopping the oven 1aArtNo.302-0006 - 6BCsetting the cook timeArtNo.302-0006 - 6BCsetting the cook timeArtNo.302-0005 -6BC Stopping the oven 1ArtNo.302-0005a -6BC Stopping the oven 1aFig.2-34Fig.2-33