Falcon Elan 90 Ceramic User Manual & Installation & Service Instructions

Also see for Elan 90 Ceramic: Instructions for use and installation

23 U109655INSTALLATIONCheck that the appliance is electrically safe when you have finished.AustraliaThis shows the single-phase connection.Check that the links are correctly fitted and that theterminal screws are tight.Secure the mains cable using the cable clamp:Fixed WiringFor connection to fixed wiring, i.e. flexible conduit,remove the electrical terminal cover box on the backpanel. Remove the two screws and blanking plate fromthe bottom flange of the cover box, so as to allow theconduit through.Fix the conduit-to-conduit mounting bracket on the backpanel. Connect the mains cable to the correct terminalsfor your electrical supply type. Check that the links arecorrectly fitted and that the terminal screws are tight.Replace the electric terminal cover box, making sure thatthe conduit is clear of the bottom flange.Main Oven LightPress the light switch in the main oven and check that thelight is working.NB. The oven light bulb is not included in theguarantee.HobplateTurn on each plate in turn and check that it heats up.GrillOpen the grill compartment door. Turn on the grill controland check that the grill heats up.Oven CheckSet the clock to the time of day. See 'The Clock' section inthe Users section of these instructions.Turn on the ovens and check that the oven fans start toturn. Turn off the ovens.Fitting the PlinthLoosen the three screws along the front bottom edgeof the cooker. Hook the central keyhole over the centralscrew. Twist and fit each end keyhole over their respectivescrews. Tighten the fixing screws:Customer CarePlease complete your details in this Guide, and, aftermaking sure that the user knows how to operate thecooker, hand over the Instructions.Thank you.