Falcon Elan 90 Ceramic User Manual & Installation & Service Instructions

Also see for Elan 90 Ceramic: Instructions for use and installation

9 U109655AustraliaThe ClockSetting the time of dayA Timer knob B Adjusting knobWhen the clock is first connected, the display flashes( ) and ( ) alternately.To set the time, turn and hold the Timer knob to the clocksymbol ( ) and at the same time turn the Adjustingknob left or right until the clock shows the time of day.Remember: this is a 24-hour clock. Let go of the Timerknob and it will spring back to the vertical, oven manualsetting.The following sections show you how to use thevarious clock functions, which apply to bothovens simultaneously. If both ovens are cookingautomatically using the timer, you can control themindividually using the different oven temperatureknobs.Minute MinderThis function acts as a reminder, setting a beeper to soundafter a set number of minutes. Turn the Timer knob to theright to the ( ) minute minder setting - it should clickinto position:Use the Adjusting knob to set the time you need as below:You can either turn the knob back to the vertical manualsetting ( ) to keep an eye on the time of day, or leave it inthe ( ) minute minder position as the time ticks down. Tostop the beeper when it sounds, turn the Adjusting knobanticlockwise.To stop the ovens at a specific time ofdayTurn the Timer knob to the ( ) position.Use the Adjusting knob to set the time at which the ovenis to stop. You can set the oven to turn on at any time overthe following 24-hour period. AUTO shows in the display:Turn the Timer knob to the bottom AUTO setting. Oncethe set time is reached, the beeper sounds. Turn the Timerknob to the vertical ( ) to return to manual cooking.To start and then stop the ovens usingthe TimerBefore you set the clock, decide on both the ‘cook time’,which is the period of time you want the oven to cook,and the ‘stop time’, which is the time of day at whichyou want the ovens to stop cooking. You cannot seta start time directly - this is set automatically by acombination of the 'cook time' and 'stop time'.Turn the Timer knob to the ( ) position:Use the Adjusting knob to set the ‘cook time’ you need:Turn the Timer knob to the ( ) position. The display willshow the current time of day plus the ‘cook time’ you justset. Use the Adjusting knob to set the ‘stop time’ you need: