25INSTALLATIONCheck the appliance is electrically safe and gas sound when you have ffinished.7. InstallationDear InstallerBefore you start your installation, please complete the detailsbelow, so that, if your customer has a problem relating toyour installation, they will be able to contact you easily.Safety Requirements and Regulationsnn This cooker must be installed in accordance withthe relevant instructions in this booklet, with therelevant national and local regulations, and withthe local gas and electricity supply companies’requirements.nn Before installation, make sure that the cooker issuitable for your gas type and supply voltage. Seethe data badge.nn The appliance must be installed in accordance withthe regulations in force and only in a well ventilatedspace.nn Read the instructions before installing or using thisappliance.nn In your own interest and that of safety, it is lawthat all gas appliances be installed by competentpersons. Failure to install the appliance correctlycould invalidate any warranty or liability claims andlead to prosecution.nn This appliance can be converted for use on anothergas.Provision of VentilationThis appliance is not connected to a combustion productsevacuation device. Particular attention shall be given to therelevant requirements regarding ventilation.All rooms require a window that can be opened, orequivalent, while some rooms require a permanent vent inaddition to the window.Location of CookerThe cooker may be installed in a kitchen/kitchen diner butnOT in a room containing a bath or shower.This appliance is designed for domestic cooking only. Usefor any other purpose could invalidate any warranty orliability claim.Note: An appliance for use on LPG must not be installedin a room or internal space below ground level, e.g. in abasement.ConversionThis appliance is supplied set for:G20 20 mbarCat II2H3+Cat II2E+3+Cat II2L3B/PCat II2E3B/PCat II2H3B/PCat II2ELL3B/PThis appliance is supplied set for group H natural gas (G20natural gas at 20 millibar).A conversion kit for another gas is included with the cooker.If the appliance is to be converted to another gas werecommend that this be carried out before installation. Seethe instructions that are supplied with the conversion kit.After converting the appliance, please attach the GasConversion sticker over the appropriate area of the databadge – this will identify the gas type for which the applianceis now set.ArtNo.050-0011 - Installer information tableInstaller’s NameAppliance Serial NumberInstaller’s Telephone NumberInstaller’s Company