<文档标题>Fanvil Technology Co., LtdHQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. ChinaTel: +86-755-2640-2199 Fax: +86-755-2640-2618 Email: sales@fanvil.com support@fanvil.com Beijing Tel:+86-10-5753-6809Suzhou Tel: +86-512-6592-0605 SEA Tel: +60-3-512-21997When the device is in the default standby mode, Press soft-button [More] till you find the [Do-Not-Disturb] button. Press [Do-Not-Disturb] button to enable DND on both line and icon will be displayedon the screen. Press [Do-Not-Disturb] button again to disable DND on both line and icon will bedisapeared.Figure 64 - DND Enabled on Both LinesIf user wishes to enable or disable DND on a specific line, user could change the DND configurationin line configurations. Long-pressed L1 or L2 line key to open the line configuration screen.NOTICE! If user has set PIN code, user must enter correct PIN code first before editing lineconfigurations. Press up navigator key twice, the DND setting is the second last setting in line configuration. Press [Select] button to enable or disable DND. When done, press [OK] button tosave the changes. User will see icon „DND on Line1‟ or „DND on Line2‟ against the enabled line.Figure 65 - Configure DND on Line1
