www.fastech.co.kr276. External Name and Function Setting of Ezi-STEP-PR6.8 I/O Signal Connector (CN1)Input/output signal connector ( Connector Type : 3M 10226-5A2JL)The programmable input/output pin is set by using user program(GUI) or DLL library.Connect the Brake (current consumption is under 200[mA]) for pin 24.Refer to 7.4 Output signal for the Brake that is over 200[mA].6.9 Communication Connector (CN5)Connector Type : RJ45Cable Type : UTP/STP CAT5EFunction No No FunctionLIMIT+ (Dedicated Input) 1 14 Digital In2 ( Programmable Input)LIMIT- (Dedicated Input) 2 15 Digital In3 ( Programmable Input)ORIGIN (Dedicated Input) 3 16 Digital In4 ( Programmable Input)Digital In1 (Programmable Input ) 4 17 Digital In5 ( Programmable Input)Digital In6 (Programmable Input ) 5 18 Digital In8 ( Programmable Input)Digital In7 (Programmable Input ) 6 19 Digital In9 ( Programmable Input)Compare Out (Dedicated Output ) 7 20 Digital Out7 ( Programmable Output )Digital Out1 (Programmable Output ) 8 21 Digital Out8 ( Programmable Output )Digital Out2 (Programmable Output ) 9 22 Digital Out9 ( Programmable Output )Digital Out3 (Programmable Output ) 10 23 +24V for brake system( Output )Digital Out4 (Programmable Output ) 11 24 Control signal of brake system(Output)Digital Out5 (Programmable Output ) 12 25 GND external(Input)Digital Out6 (Programmable Output ) 13 26 +24V external(Input)* This connector fixed pin is connected to frame GND through a mount hall.Pin No. Function1,2,4,5,7,8 GND3 Data+6 Data-case Frame GNDLED No. Display Color Lighting Condition1,3 RUN Green Flash when CPU in the drive operates2,4 COMM Yellow Flash when this communicates with theupper controllerCaution