GE 162D9617P004 Owner's Manual

Customer ServiceTroubleshooting TipsOperating InstructionsSafety InstructionsInstallation InstructionsPreparing to install the refrigerator.Read these instructions completely and carefully.Water Supply to the IcemakerYou will need to connect the icemaker to a coldwater line.A water supply kit (containing copper tubing,shutoff valve, fittings and instructions) is availableat extra cost from your dealer or from Parts andAccessories, 800-626-2002.Refrigerator LocationInstall it on a floor strong enough to support itfully loaded.ClearancesAllow the following clearances for ease ofinstallation, proper air circulation and plumbingand electrical connections.24¢ Model 28¢ Model 30¢ ModelSides 1/8≤ (3 mm) 1/8≤ (3 mm) 1/8≤ (3 mm)Top 1≤ (25 mm) 1/8≤ (3 mm) 1/8≤ (3 mm)Back 1/2≤ (13 mm) 1/2≤ (13 mm) 1/2≤ (13 mm)If built-in, allow 7/8≤ (22 mm) for hinge covers.If the refrigerator is against a wall on either side,allow 3/4≤ (19 mm) for freezer door clearanceand 3/4≤ (19 mm) for fresh food door clearance.Leveling RollersThe rollers have 2 purposes:The rollers can be adjusted so the refrigerator isfirmly positioned on the floor and does not rockback and forth.Rollers allow you to move the refrigerator awayfrom the wall for cleaning.To adjust the rollers, remove the base grille by pullingit out at the bottom.Turn the two front roller adjusting screwsclockwiseto raise the refrigerator,counterclockwise to lowerit. Use a 3/8≤ socket wrench, adjustable wrench orpliers.Built-In Style models also have rear adjustablerollers so you can align the refrigerator with yourkitchen cabinets. Use a 5/16≤ socket wrench to turnthe screws for the rear rollers—clockwise to raise it,counterclockwise to lower it.2119Front RollerAdjusting ScrewRear Roller Adjusting Screw(on Built-In Style models only).Use this screw if the refrigeratorhas one.Rear Roller Adjusting Screw(on Built-In Style models only).Use this screw if the refrigeratordoes not have the screw picturedto the left.Front RollerAdjusting Screw