Using the clock and timer. (on some models)22Operating InstructionsInstallation InstructionsSafety InformationTroubleshooting TipsCustomer ServiceThe clock must be set for the automatic oven timingfunctions to work properly. The time of day cannot bechanged during a timed baking or self-cleaning cycle.To Set the Clock:Press theCLOCK pad.Press theHOUR andMIN. orSET TIME +/- pads.Press theCLOCK pad to start.321Make sure the clock is set to thecorrect time of day.To Set the Timer:Press theTIMER ON/OFF pad.Press theHOUR andMIN. orSET TIME +/- padsuntil the amount of time you want shows in thedisplay. The timer will start automatically withina few seconds of releasing the pad.To Reset the Timer:If the display is still showing the time remaining,you may change it by pressing theHOUR andMIN. orSET TIME +/- pads until the time you want appears inthe display.If the remaining time is not in the display, recall theremaining time by pressing theTIMER ON/OFF pad andthen pressing theHOUR andMIN. orSET TIME +/- padsuntil the new time you want shows in the display.To Cancel the Timer:Press theTIMER ON/OFF pad once. To cancel thetimer press theTIMER ON/OFF pad again and holdfor 4 seconds.21The timer is a minute timer only.The timer does not control ovenoperations. The maximum setting onthe timer is 11 hours and 59 minutes.or 9 hours and 50 minutes, dependingon your model.End of Cycle Tones (on some models)Clear the tones by pressing the pad of the function youare using.or