Installation of the range.Read these instructions completely and carefully.Before You BeginIMPORTANT: Save these instructions for the local electricalinspector’s use.IMPORTANT: OBSERVE ALL GOVERNING CODES ANDORDINANCES.NOTE TO INSTALLER: Leave these instructions with theappliance after installation is completed.NOTE TO CONSUMER: Keep this Owner’s Manual andInstallation Instructions for future use.NOTE: This appliance must be properly grounded.n Large blade screwdrivern 1/4″ hex head nutdrivern Channel lock pliersTools You Will NeedElectrical RequirementsCAUTION, FOR PERSONAL SAFETY: DO NOT USE ANEXTENSION CORD WITH THIS APPLIANCE.REMOVE HOUSE FUSE OR OPEN CIRCUIT BREAKERBEFORE BEGINNING INSTALLATION.This appliance must be supplied with the proper voltage andfrequency, and connected to an individual, properly groundedbranch circuit, protected by a circuit breaker or time delay fuse,as noted on the rating plate.Wiring must conform to National Electric Codes.If the electric service provided does not meet the abovespecifications, have a licensed electrician install an approved outlet.Because range terminals are not accessible after range is in position,flexible service conduit or cord must be used.Troubleshooting TipsInstallation InstructionsCustomer ServiceOperating InstructionsSafety Information37