GE 18, 19 Owner's Manual

Also see for 18, 19: Owner's manual Owner's manual Use and installation guide Owner's manual Owner's manual

When reversing the door swing:• Read the instructions all the way through beforestarting.• Handle parts carefully to avoid scratching paint.• Set screws down by their related parts to avoid usingthem in the wrong places.• Provide a non-scratching work surface forthe doors.IMPORTANT: Once you begin, do not move thecabinet until door-swing reversal is completed.These instructions are for changing the hinges fromthe right side to the left side—if you ever want to changethe hinges back to the right side, follow these sameinstructions and reverse all references to left and right.Unplug the refrigerator from its electrical outlet.Empty all door shelves, including the dairycompartment.IMPORTANT NOTES3/8″ Head socket driver(a 6-point socket isrecommended)TOOLS YOU WILL NEEDPhillips screwdriverPutty knife orthin-blade screwdriverMasking tapeT20 or T25 Torx®driver, whichever yourmodel requires19On power switch models, set the icemaker powerswitch to the l (on) position. On feeler arm models,move the feeler arm to the ON (down) position. Theicemaker will not begin to operate until it reachesits operating temperature of 15°F (–9°C) or below.It will then begin operation automatically.NOTE: In lower water pressure conditions, thewater valve may turn on up to 3 times to deliverenough water to the icemaker.Arrange the coil of tubing so that it does not vibrateagainst the back of the refrigerator or against thewall. Push the refrigerator back to the wall.PLUG IN THE REFRIGERATOR11 START THE ICEMAKERPowerswitchPower switch modelFeeler Arm in theSTOP (up) positionFeeler Arm inthe ON (down) positionFeeler arm modelInstallation InstructionsREVERSING THE DOOR SWING