GE 18, 19 Owner's Manual
Also see for 18, 19: Owner's manualOwner's manualUse and installation guideOwner's manualOwner's manual
                                                                                                        | |
Contents
|
20REMOVE THE REFRIGERATORDOOR2Tape the door shut with masking tape.Remove the center hinge pin with a 3/8″ socketand ratchet.Remove the tape and tilt the door away from thecabinet. Remove and save the washer on the hinge pin.Lift the door straight up to free its bottom socket fromthe pin in the bottom hinge bracket.Set the door on a non-scratching surface with theinside up.CAUTION: Do not let door drop to the floor.To do so could damage the door stop.TRANSFER TOP HINGE TOTHE LEFTInterchange hinge and screws at top right with screwsat the top left of cabinet.Do not tighten screws on hinge side at this time.3Plastic WasherFresh Food DoorHinge PinCenter HingeBracketInstallation InstructionsREVERSING THE DOOR SWING (CONT.)REMOVE THE FREEZER DOOR1Tape the door shut with masking tape.Remove the tape and tilt the door away from thecabinet. Lift it off the center hinge pin.Set the door on a non-scratching surface withthe inside up.Remove the hinge cover on top of the freezer door(on some models).Remove the two Torx® screws, then lift the hingestraight up to free the hinge pin from the socket inthe top of the door.Top Hinge |
Related manuals for GE 18, 19
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine