GE 22 Owner's Manual & Installation Manual

Also see for SIDE-BY-SIDE REFRIRATOR 22: Owners and installation manual Owner's manual Use and care & installation guide Use and care & installation guide Owner's manual

Contents

12 49-60647-5Not all features are on all models.Refrigerator Door Bins and Freeer Door Tilt-Out BinsBinsbins are adjustable.To remove Lift the front of the bin straight up, then liftup and out.To replace or relocate Engage the back side of the binin the molded supports of the door. Then push down onthe front of the bin. Bin will lock in place.The snugger helps prevent tipping, spilling or sliding ofsmall items stored on the door shelf. Place a finger oneither side of the snugger near the rear and move it backand forth to fit your needs.NOTE Be careful when placing items in the top bin.Make sure that items do not block or fall into the ice chute.NOTE Part must be in place as shown for proper iceShelves and BinsRefrigerator binSnuggerSlide-Out Spillproof ShelfThe slide-out spillproof shelf allows you to reach itemsstored behind others. The special edges are designed tohelp prevent spills from dripping to lower shelves.To remove Slide the shelf outuntil it reaches the stop, thenpress down on the tab andslide the shelf straight out.To replace or relocate Line the shelf up with thesupports and slide it into place. The shelf can berepositioned when the door is at 90 or more. Toreposition the shelf, slide the shelf past the stopsand angle downward. Slide shelf down to the desiredposition, line up with thesupports and slide into place.Make sure you push theshelves all the way back inbefore you close the door.Press tab and pull shelfforward to removeQuickSpace™ Shelf (on some models)This shelf splits in half and slides under itself for storageof tall items on the shelf below.This shelf can be removed and replaced or relocated justlike Slide-Out Spillproof Shelves.On some models, this shelf can not be used in thelowest position.(on some models)Top freeer bins