GE 22 Owner's Manual & Installation Manual

Also see for SIDE-BY-SIDE REFRIRATOR 22: Owners and installation manual Owner's manual Use and care & installation guide Use and care & installation guide Owner's manual

Contents

32 49-60647-5INSTALLING THE WATER LINE (Icemaker & dispenser models)BEFORE YOU BEGINtubing you need. Approved plastic water supplylines are SmartConnect™ Refrigerator TubingWhen connecting your refrigerator to a ReverseOsmosis Water System, the only approvedother reverse osmosis water systems, follow themanufacturers recommendations.the refrigerators filter bypass plug. Using therefrigerators water filtration cartridge in conjunctionwith the RO filter can result in hollow ice cubes andslower water flow from the water dispenser.This water line installation is not warranted byexpensive water damage.Water hammer (water banging in the pipes) inhouse plumbing can cause damage to refrigeratorparts and lead to water leakage or flooding. Call aqualified plumber to correct water hammer beforeinstalling the water supply line to the refrigerator.To prevent burns and product damage, do not hookup the water line to the hot water line.water line, make sure the icemaker power switch isin the oWhen using any electrical device (such as a powerdrill) during installation, be sure the device is doubleinsulated or grounded in a manner to prevent theAll installations must be in accordance with localplumbing code requirements.WHAT YOU WILL NEED Copper or SmartConnect™ Refrigerator Tubingkit,ends of the tubing are cut square.To determine how much tubing you need: measurethe distance from the water valve on the back of therefrigerator to the water supply pipe. Be sure thereis sufficient extra tubing to allow the refrigerator tomove out from the wall after installation.available in the following lengths:Connect to potable water supply only.A cold water supply is required for automaticicemaker operation. The water pressure must bebetween 40 and 120 psi (275-827 kilopascals).Installation Instructions