GE 22 Owner's Manual & Installation Manual

Also see for SIDE-BY-SIDE REFRIRATOR 22: Owners and installation manual Owner's manual Use and care & installation guide Use and care & installation guide Owner's manual

Contents

18 49-60647-5Using the DispenserSelect CUBED ice,CRUSHED iceor WATER.Press the glass gently againstthe top of the dispensercradle.The spill shelf is not self-draining. To reduce waterspotting, the shelf and its grilleshould be cleaned regularly.when the refrigerator is firstinstalled, there may be air inthe water line system. Press the dispenser arm for atleast two minutes to remove trapped air from the waterline and to fill the water system. To flush out impurities inthe water line, throw away the first six glassfuls of water.Laceration Haardthe ice crushing blades and lead to serious injury oramputation.glass may break and result in personal injury.Locking the DispenserPress the LOCK or LOCK CONTROLSpad for 3 seconds to lock the dispenserand control panel. To unlock, press andhold the pad again for 3 seconds.Before replacing a burned-out lightbulb, the refrigerator should be unplugged in order toavoid contact with a live wire filament. (A burned-out lightbulb may break when being replaced.)power to the light circuit.Dispenser LightThis pad turns the light in the dispenseron and off. The light also comes onwhen the dispenser cradle is pressed.out, it should be replaced with a 6 wattService.Door AlarmUse Door Alarm to sound if either dooris open for more than 3 minutes. Thealarm will stop once the door is closed.screen.Touch LED Dispenser ControlPress the SET FEATURES pad once and DOOR ALARMwill blink. Press ON/OFF and the door alarm will be setand the icon will turn solid. Press ON/OFF again to turnthe alarm off.Door AlarmTo set the alarm, press this pad until the indicator lightcomes on. This alarm will sound if either door is open formore than 3 minutes. The light goes out and the beepingstops when you close the door.Ice and Water Dispenser (on some models.)Quick IceWhen you need to speed up iceproduction, use the Quick Ice feature.While this feature is turned on, thethis period, ice production will increase up to 40.Models with the integrated ice feature system requiredispensed every 6 to 12 hours. This will help the icemaker fill the bucket properly so that dispensing is better.How to UseTouch LED Dispenser ControlPress the SET FEATURES pad twice and QUICK ICEwill blink. Press ON/OFF to turn the feature on, thenagain to turn it off.Quick IceWhen you need ice in a hurry, press this pad to speedup ice production. This will increase ice production forthe following 48 hours or until you press the pad again.Spill Shelf