GE 234D1050P001 Owner's Manual

GE 234D1050P001 Owner's Manual Manual pdf 7 page image

7About the dryer control panelPowerPress to “wake up” the display If the display is active, press to put the dryer in the standby modeNOTE: Pressing POWER does not disconnect the appliance from the power supply.Dry CyclesThe dry cycle controls the length and tumble speed of the drying process The chart below will help you match the drysetting with the loadsSensor Cycles DescriptionCOTTONS For cottons and most linensNORMAL/MIXED LOADS For loads consisting of cottons and poly-blendsEASY CARE For wrinkle-free and permanent press itemsACTIVE WEAR Clothing worn for active sports exercise and some casual wear Fabrics include newtechnology finishes and stretch fibers such as SpandexDELICATES For lingerie and special-care fabricsSPEED DRY For small loads that are needed in a hurry, such as sports or school uniforms Can also beused if the previous cycle left some items damp, such as collars or waistbands12Timed Dry Cycles DescriptionWARM UP Provides 10 minutes of warming time to warm up clothesAIR FLUFF Use this feature to tumble items without heatDEWRINKLE(on some models)For removing wrinkles from items that are dry or slightly damp This cycle is notrecommended for delicate fabricsSTEAM REFRESH(on some models)For slightly wrinkled dry garments Significantly reduces wrinkles on up to 5 garments Afterthe STEAM REFRESH Cycle, the unit will beep and display “0:00 ” If the unit is not turned offor if the door is not opened, the dryer will continue to tumble for 30 minutes At the end of 30minutes, it will display “0:00” and the cycle will be completeNote: A single extremely light fabric item may need to have an additional item included in theSTEAM REFRESH cycle to achieve optimum resultsSTEAM DEWRINKLE(on some models)For use with larger loads than STEAM REFRESH Ideal for loads left in dryer for an extendedtimeMy Cycle DescriptionMY CYCLE Press to use, create or modify custom dry cycles (See page 8 for more details)Timed DryUse to set your own dry time TIMED DRY is also recommended for small loadsTo use TIMED DRY:1. Turn dry cycle dial to TIMED DRY2. Increase the drying time by pressing the TIMEDRY ADJUST + buttonNote: This button only increases the time When max time is reached, pressing the button again will reset the counter tothe lowest setting3. Select the TEMP.4. Close the door5. Press Start3GEAppliances.com