GE 234D1050P001 Owner's Manual

GE 234D1050P001 Owner's Manual Manual pdf 9 page image

9About cycle options.NOTE: Not all features are available on all dryer models GEAppliances.comExtended TumbleMinimizes wrinkles by adding approximately60 minutes of no-heat tumbling after clothesare dry The beeper will sound every twominutes as a reminder to remove the clothesThe ESTIMATED TIME REMAINING display willshow 00The Extended Tumble time does not getadded to the cycle time on the displayDamp AlertThis option causes the dryer to beep whenclothes have dried to a damp level Removeitems that you wish to hang dry TheDAMP ALERT will only beep when this optionis selectedRemoving clothes and hanging them whenthey are damp can reduce the need to ironsome itemsDelay StartUse to delay the start of your dryer1 Choose your dry cycle and any options2 Press DELAY START You can increasethe delay time in 1 hour increments usingthe DELAY START button3 Press the START pad to startthe countdownNOTES:n If the door is opened while the dryer isin DELAY START, the countdown timewill not restart unless the door is closedand START has been pressed againe-DRYReduces the total energy consumption ofspecific dryer cycles by adjusting certainheat settingsNote: Cycle times will change when e-DRY isselected.This feature can be used with DELICATES,ACTIVE WEAR, EASY CARE, NORMAL/MIXEDLOADS and COTTONS.SignalAlerts you that the cycle is completeThe beeper will continue to sound everyminute for the next 5 minutes, until theclothes have been removed The clothesshould be removed when the beeper goesoff so wrinkles don’t set inPress SIGNAL to select low, medium or highvolume, or to turn the beeper off