Care and CleaningProfessional Rangetops17Grill grate,frame andbaffle(on some models)The IR Grill should be cleaned immediately aftereach use.&OHDQWKH*ULOO*UDWHTurn the burner to OFF. Use a barbecue mitt toremove the hot grill grate. Place the grill gratein a basin or sink and scrub with a brass bristlebrush. Rinse frequently.The grill grate may also be cleaned in the ovenduring the self-cleaning cycle, or, it can becleaned in the dishwasher.&OHDQWKH*ULOO*UDWH)UDPHThe grill grate frame can be cleaned by hand orin the dishwasher. Do not clean the grill grateframe in a self-cleaning oven. The grill grateframe has rubber pads on each bottom corner.Be careful not to damage the pads during thecleaning process.&OHDQWKH5DGLDQWEDIIOHLift the baffle out of the pan. Clean the bafflewith hot soapy water or in the dishwasher.&OHDQWKH3DQ6XUURXQG:LUH0HVKThe pan surround and wire mesh cannot beremoved. Clean them in place. Use a soft dampcloth to clean the pan surround. Gently brushfood particles into the grease trough or use avacuum cleaner for excess debris.,03257$17 Keep the grill burner and ceramicigniter dry. Do not spray water or cleaner directlyonto the wire mesh or igniter. Avoid contact withthe igniter, it is fragile and can chip or break.5HDVVHPEOHWKH*ULOOReverse the steps above to reassemble the grill.The radiant baffle support tabs should engagethe pins on the side of the pan surround. Replacethe grate frame. Be sure to engage the bottomlocator pin with the pin hole at the left rearside of the pan. Replace the grill grate with thehandle end towards the front of the rangetop.1. Grill Grate2. GrateFrameSupport TabsGlo-Bar Igniter3. Radiant Baffle4. Pan SurroundWire MeshBurnerLocatorPin Hole