GE 364B7130P001 Owner's Manual

GE 364B7130P001 Owner's Manual Manual pdf 11 page image

11About cycle options. NOTE: Not all features are available on all dryer models.lockYou can lock the controls to prevent anyselections from being made. Or you can lockthe controls after you have started a cycle.Children cannot accidentally start the dryerby touching pads with this option selected.To lock the dryer, press and hold the lock iconfor 3 seconds. To unlock the dryer, press andhold the lock icon for 3 seconds.The icon of the lock next to the timer will lightup when the controls are locked.H OLD 3 SECTO STORE M Y CYCLEMy Cycle (on some models)To save a favorite cycle, set the desiredsettings and hold down the My CyClE buttonfor 3 seconds. A beep will sound to indicatethe cycle has been saved.To use your custom cycle, pressthe My CyClE button before drying a load.To change the saved cycle, set the desiredsettings and hold down the My CyClE buttonfor 3 seconds.See page 8 for more details.DELAY CLEAN LINT FILTERDRYING DAMP COOL DOW NEstimated Time RemainingDisplays the approximate time remaininguntil the end of the cycle.As the cycle begins, you will see an initialapproximate total cycle time in the display.Then lights will “race” in the display. Thismeans the dryer is continuously monitoringthe amount of moisture in the load.The lights will continue until the dryer sensesa low level of moisture in the load. At thatpoint, the dryer will calculate and displaythe approximate time remaining.About dryer features.Drying Rack (on some models)A handy drying rack may be used for drying delicate items such as washablesweaters. Place items flat on the drying rack and block such items as woolsweaters and delicate fabrics. Dry with low heat.To install the drying rack, pull up the lint filter slightly. Insert the drying rackinto the slots, then push the filter back down.NOTE:n The drying rack must be used with the TIMED DRy or RACk DRy(on some models) cycles.n Do not use this drying rack when there are other clothes in the dryer.Drum lampBefore replacing the light bulb, be sure to unplug the dryer power cordor disconnect the dryer at the household distribution panel by removingthe fuse or switching off the circuit breaker. Reach above dryer openingfrom inside the drum. Remove the bulb and replace with the same size bulb.Operating InstructionsSafety Instructions Consumer SupportTroubleshooting Tips