GE 400 Series Maintenance Manual

Also see for 400 Series: User manual User manual Instruction Instructions Instructions

Contents

GE 400 Series Maintenance Manual Manual pdf 6 page image

66. Do not install unit near acid or acid fumes.7. The use of resin cleaners in an unvented enclosure is not recommended.Water Line ConnectionThe installation of a bypass valve system is recommended to provide for occasionswhen the water conditioner must be bypassed for hard water or for servicing.The most common bypass systems are the Autotrol ® Series 256 bypass valve(Figure 4) and plumbed-in globe valves (Figure 5). Though both are similar in function,the 256 Autotrol bypass offers simplicity and ease of operation.Figure 4 Autotrol Series 256 Bypass ValveFigure 5 Typical Globe Valve Bypass SystemDrain Line Connection1. Ideally located, the unit will be above and not more than 20 feet (6.1 m) from thedrain. For such installations, use an appropriate adapter fitting (not supplied), toconnect 1/2-inch (1.3-cm) plastic tubing to the drain line connection of the controlvalve.Not in Bypass In BypassBYPASSBYPASSBYPASSBYPASSWaterConditionerWaterConditionerNot in Bypass In Bypass