GE 49-90344 Installation Instructions Manual

InstallationInstructionsInstructions en franqais : ................ 4Instrucciones en espa5ol: ............... 8Pedestal ModelsWhite Pedestal SPSD157JWWMetallic Gold SPSD157JMGMetallic Vermillion SPSDI57JMVFor Washer Model: WPDH8800For Drger Models: DPVH880EJ, DPVH8800GJBEFORE YOU BEGINRead these instructions completelgand cerefullg.• IM PORTANT - Savetheseinstructionsfor local inspector's use.• IMPORTANT-Observeallgoverningcodes and ordinances.• Note to Consumer - Keep these instructionswith gour Owner's Manual for future reference.• Completion time - i to 2 hours• Proper installation is the responsibilitgof the installer.• Product failure due to improper installation is notcovered under the Warrantg._, CAUTION - Duetothesizeandweightof these products, and to reduce the risk ofpersonal injury or damage to the product, TWOPEOPLE ARE REQUIRED FOR PROPER INSTALLATION.• See washer and drger installation instructions foradditional installation requirements and guidelines.TOOLS YOU WILL NEEDPhillipsHeadScrewdriver9/16" Open End Wrenchor Adjustable Wrench8 mm Socket WrenchINSTALLATION PREPARATIONRemove the packaging.The Drawer divider is taped at the top of theshipping carton. Remove the divider and set asidefor final installation.Flatten the product carton to use as a padto lag the washer or drger down on its side.Continue using the carton to protect the finished floorin front of the installation location.KIT CONTENTS4 Support Pads4 Mounting ScrewsDrawer Divider[] REMOVE THE LEVELING LEGS[] Carefullg lag the washer or drger on its sideto access the leveling legs on the bottomof the appliance.IMPORTANT: Do not leg the washer or drgeron its back! Do not remove the shipping boltson the back side of the washer. The bolts mustremain in place until the washer is returnedto on upright position.[] Use an open-end wrench to remove thewasher or drger leveling legs.1