GE Advantium PSB9240 Installation Instructions Manual

Also see for Advantium ZSC2200: Installation instructions Installation instructions Installation instructions Installation instructions Owner's manual

Contents

9Installation PreparationPreparation WITH an Accessory Storage DrawerNOTE: MODEL ZSC2202 CANNOT BE INSTALLED WITH AN ACCESSORY STORAGE DRAWER. SEE INSTALLATION PREPARATIONWITHOUT AN ACCESSORY STORAGE DRAWER FOR THIS MODEL.PREPARE THE OPENING (CONT.)Installation over a GE/Monogram Oven andWarming Drawer:* For existing cutouts, a maximum width of 28-1/2”is acceptable. If the opening is slightly wider,secure a furring strip on each side of the cutoutfor securing the oven.NOTE: Additional clearances between the cutoutsmay be required. Check to be sure the oven supportsabove the Warming Drawer location do not obstructthe required interior depth and height. See WarmingDrawer installation instructions for details.CAUTION: For personal safety, themounting surface must be capable of supportingthe cabinet load, in addition to the added weightof this approximate 80-pound oven and 30-pounddrawer, plus additional oven loads of up to 50pounds or a total weight of 160 pounds.PRECAUCIÓN: Para seguridadpersonal, la superficie de montaje debe podersoportar la carga del gabinete, además del pesoaproximado de 80 libras del horno y las 30 librasdel cajón, más las cargas adicionales del hornode hasta 50 libras o un peso total de hasta160 libras.ConstructSolid BottomMin. 3/8”PlywoodSupported by2x4 or 2x2Runners allFour Sides30” 23-1/2”21”2” Min.Per OvenRequirement45-1/4”Min. Per warming drawer requirement2” Min.(3” recommended)PREPARE THE OPENING (CONT.)Installation over a GE/Monogram Oven:* For existing cutouts, a maximum width of 28-1/2”is acceptable. If the opening is slightly wider,secure a furring strip on each side of the cutoutfor securing the oven.,I\RXDUHUHSODFLQJD*(0RQRJUDPHOHFWULFdouble oven with the combined installation ofan Advantium 240V and a single oven, use thedimensions shown. The middle rail separatingthe two openings may need to be larger thanthe 2” minimum shown.30” 23-1/2”25-1/4”Min.*21” 2” Min.(3” recommended)45-1/4”Min.Construct SolidBottom Min.3/8” PlywoodSupported by2x4 or 2x2Runners allFour SidesPer OvenRequirement25-1/4”Min.*