GE CTT14CYT Use And Care & Installation Manual

Contents

REVERSING THE DOOR SWING(continued)14REHANG THE FROZEN FOOD STORAGECOMPARTMENT DOOR.a. Lower thebottom socket ofthe frozen foodstoragecompartmentdoor onto thecenter hinge pin.Be sure thewasher is inplace on the pin.b. Tilt the doortoward thecabinet, liftingthe top hinge sothe pin fits into the socket on the top of the door.c. Before tightening the top hinge screws, makesure the top of the door is level with the cabinettop and the space between the doors is equalacross the entire front. Do not overtighten thesescrews––tighten them until they are just snug,then turn them in another one-half turn.6 RELOCATE THE PLASTIC-COVEREDSNACKS DRAWER. (on some models)For convenient access to the Snacks drawerafter reversing the door swing, you can move thedrawer to the other side of the cabinet.1. Slide the drawer out and remove the shelfto which it was attached.2. Remove the other half-width shelf.3. Push the drawer cover forward and upoff the shelf.4. Put the cover on the other half-width shelf asshown, flush to the side with the shelf-lockinglugs. Return both shelves to the refrigerator andslide the Snacks drawer into its relocated cover.8HingePinPlastic WasherEXAMINE THE DOOR GASKETS.Check the door gaskets all around, making sureno gaps are visible between the gaskets and thecabinet. If a gap shows, try stretching the gasketaway from the door so the magnet in the gasketwill contact the cabinet surface, being careful notto dislodge the gasket.7