GE CafÃ?Â© CSHS6UGZSS Owner's Manual And Installation

Contents

23Installation InstructionsPUT THE REFRIGERATORIN PLACEMove the refrigerator to its final location.4LEVEL THE REFRIGERATORThe refrigerator can be leveled byadjusting the rollers located near thebottom hinges.Rollers have three purposes:• Rollers adjust so the door closes easilywhen opened about halfway. (Raise thefront about 5/8” [16 mm] from the floor.)• Rollers adjust so the refrigerator isfirmly positioned on the floor and doesnot wobble.• Rollers allow you to move therefrigerator away from the wallfor cleaning.To adjust the rollers:• Turn the rolleradjusting screwsclockwise to raisethe refrigerator,counterclockwiseto lower it. Usea 3/8” hex socketor wrench, oran adjustablewrench.5RollersRoller adjusting screwLEVEL THE DOORSAdjust the refrigerator door to make thedoors even at the top.To align:Using a 7/16” wrench, turn the dooradjusting screw to the right to raise thedoor, to the left to lower it.NOTE:A nylon plug, imbedded in the threadsof the pin, prevents the pin from turningunless a wrench is used.After one or two turns of the wrench,open and close the refrigerator door andcheck the alignment at the top of the doors.6ABDoors should be even at topRaise7/16” wrenchRaiseSCREW DOWN SUPPORT LEGScrew down the support leg until ittouches the floor. This will prevent doormisalignment.7