Consumer SupportTroubleshooting TipsOperating InstructionsSafety Instructions Installation Instructions5Empty the pan. Place the Chill tray in thepan. Place the items on the tray and closethe pan completely.Select the ExpressChill ™ pad. On somemodels, you can then select the chill time(use chart to determine best setting). Othermodels will only have one option (45minutes). On models with multiple settings,tap the pad until the light appears next tothe desired setting. To stop a feature before it isfinished, tap that feature’s paduntil no options are selected andthe display is off. During ExpressChill, the display on thecontrols will count down the timein the cycle.About ExpressChill™. (on some models) GEAppliances.comThe ExpressChill™ feature is a systemof dampers, a fan and a temperaturethermistor.The pan is tightly sealed to prevent the pan’stemperature from causing temperaturefluctuations in the rest of the refrigerator.The controls for this pan are located in the topof the refrigerator or on the dispenser with thetemperature controls.How to UseHow it WorksTo remove:Pull the drawer out to the stop position.Rotate all four swing locks to the unlockposition.Lift the front of the drawer up and out.To replace:Make sure all four swing locks are in theunlock position.Place the sides of the drawer into thedrawer supports, making sure the swinglocks fit on the drawer slots.Lock all four swing locks by rotating themto the lock position.How to Remove and Replace the DrawerExpressChill ™ExpressChill™ ChartNOTE: Results may vary depending on packaging, starting temperature and other food traits.15 Minutes 1 Beverage Can (12 oz) 2 Small Juice Boxes(6–8 oz each)30 Minutes 2 to 6 Beverage Cans(12 oz each) 2 Plastic 20 oz Bottlesof Beverage 4 to 6 Small Juice Boxes(6–8 oz each) 3 Foil Juice Packets Wine (750 ml bottle)45 Minutes 2 Liters of Beverage 1/2 Gallon of Juice Gelatin—1 package