GE Cafe CYE23TSDCSS Owner's Manual And Installation Instructions

41Truth or Myth? Answer ExplanationDoor removal is always required for installation. MYTH Check chart on reverse side of this instruction. Doors should only beremoved when necessary to prevent damage from passage way oraccess to final location.Refrigerator doors that won’t close after installation,can be adjusted to close properly.TRUE Door mechanism works best if installed at 90°+. If installed at 180°,remove the door from the mid hinge, and swing the door 180° beforereinstalling. See Reinstalling the Refrigerator Doors.There is an adjustment to rear wheels. MYTH Front leveling legs are adjustable and should be used to balance therefrigerator. Leveling legs are used to make initial fresh food dooradjustment.Check for leaks after all water connections are made. TRUE While purging the air from the water system, check all water lineconnections for leaks. Check the connection to the household watersupply at back of refrigerator, and door water line connect.My LCD display will always be on when I plug thepower cord in at installation.MYTH If the refrigerator has been stored in a cold environment, the LCD may beslow to give a proper display. Give the refrigerator enough time to warmup, and the display should be okay.Any packaging residue can be cleaned off therefrigerator using any cleaner.MYTH Do not use wax, polish, bleach, or other products containing chlorine onStainless Steel panels, door handles and trim. Check this instruction under“Cleaning the Outside” for full details.Before you call for service, review the detailed troubleshooting tips in the Owner’smanual. If needed, service can be scheduled by visiting us online GEAppliances.com or calling 800.ge.CARES 800.432.2737Truth or Myth (cont.)SERVICE