GE Coil Top Owner's Manual And Installation Instructions

Also see for Digital Radiant Cooktop: Owner's manual Owner's manual Owner's manual Owner's manual Use and care guide

GE Coil Top Owner's Manual And Installation Instructions Manual pdf 10 page image

Bake PadTouch to select the bake function.Bake LightFlashes while in edit mode - you can change theoven temperature at this point. Glows when theoven is in bake modeBroil Hi/Lo PadTouch to select the broil function.Broil LightFlashes while in edit mode - you can switch fromHi to Lo Broil at this point. Glows when the oven isin broil mode.DisplayShows the operations you have selected, thetime of day and the cooking status.Cooking Time PadTouch this pad and then touch the + or - pad toset the amount of time you want your food tocook. The oven will shut off when the cookingtime has run out.Delay Start PadUse along with Cooking Time or Self Clean padsto set the oven to start and stop automatically ata time you set.Oven Light On/Off PadTouch to turn the oven light on or off.Time/Clock PadTouch this pad to select the time feature. Thenpress + and - pads to adjust the time.To set the clock, touch this pad twice and hold3 seconds and then touch the + and - pads. Thetime of day will flash in the display when theoven is first turned on.Start PadMust be touched to start any cooking.- PadShort taps to this pad will decrease the time ortemperature by small amounts. Touch and holdthe pad to decrease the time or temperature bylarger amounts.+ PadShort taps to this pad will increase the time ortemperature by small amounts. Touch and holdthe pad to increase the time or temperature bylarger amounts.Clear/Off PadTouch to cancel ALL oven operations exceptthe clock and timer.Self Clean PadTouch to select self-cleaning function. See theUsing the self-cleaning oven section.Clean LightFlashes while in edit mode - you can changethe length of time for the self-clean cycle at thispoint. Glows when the oven is in the self-cleancycle. After the self-clean cycle, the light will turnoff. Unlatch the door.If “F– and a number or letter” flash in the display and theoven control signals, this indicates a function error code.Touch the Clear/Off pad. Allow the oven to cool for onehour. Put the oven back into operation. If the functionerror code repeats, disconnect the power to the ovenand call for service.Oven Control, Clock, and Timer and Features and SettingsUsing the oven controls.10