41Problem SolverGEAppliances.comProblem Possible Cause What To DoDryer won’t operate Control panel is asleep • This is normal. Press POWER, thetouch screen or any button to activatethe control panel.Dryer is unplugged • Make sure cord is plugged securely intoa working outlet.Controls are not set properly • Make sure the cycle was set correctly,close the lid and press START.Fuse is blown/circuit breaker • Check house circuit breakers/fuses.is tripped Replace fuses or reset breaker.NOTE: Electric dryers use two fusesor breakers.Electronics need to be reset • Unplug dryer, wait 2 minutes, plugback in and press POWER.START was not pressed after • Press START.a cycle was setDoor was opened during • Close the door and reset cycle, to thethe dry cycle beginning if necessary. Press START.Dryer is too cold • If the dryer has been exposed totemperatures below freezing for anextended period of time, allow it towarm up before pressing POWER.Otherwise, the display will not come on.For a complete list of solutions to common dryer problems, use theTroubleshooting Tips feature located by pressing the HELP buttonwhile on the dryer Home Screen (see Using the Troubleshooter).If your dryer will not operate, check the Problem Solver below:The following are normal sounds you may hear:Sound DescriptionThumping noise when • If the dryer has not been used for an extended period of time, you maydrum rotates hear a thumping noise from temporary flat spots on the drum supportrollers. The noise will go away after use.NormalOperatingSounds