GE DSXH47EG Technical Service Manual

Also see for DSXH47EG: Dimensions and installation information Dimensions and installation information Dimensions and installation information Owner's Manual & Installation Instructions Tech manual

Contents

GE DSXH47EG Technical Service Manual Manual pdf 40 page image

40Removing the high limit thermostat:1. Disconnect the dryer from electrical supply andremove the top panel.2. Disconnect the (2) wires and remove the (2)screws holding thermostat to the heating elementassembly.Removing the thermal limiter(Electric dryer):1. Disconnect the dryer from electrical supply andremove the top panel.2. Disconnect the (2) wires and remove the twoscrews holding the thermal limiter to the rearpanel.Removing the drum heat shield(Electric dryer):1. Disconnect the dryer from electrical supply andremove the drum.2. Remove the (3) screws holding the shield to therear of the drum.Removing the hitch:1. Disconnect the dryer from electrical supply andremove the drum.2. Using a 5/16” nut driver, remove the (2) screwsholding the hitch to the rear panel while holding thelarge tinnerman clip from the rear of the dryer.Note: Do not lose the grounding ball or the tinnermanmounting clip from the rear of the dryer.