GE Digital Radiant Cooktop Owner's Manual

Also see for Digital Radiant Cooktop: Owner's manual Owner's manual Owner's manual Owner's manual and installation instructions Use and care guide

Contents

GE Digital Radiant Cooktop Owner's Manual Manual pdf 10 page image

Touch ControlsDigital Radiant Cooktop10Using thebridgesurface unitThe controls can be used to create an oblongheated area.Because of its bigger dimensions, larger panscan be used on the bridge surface unit.Choose pans that match the bridge surfaceunit area as closely as possible.To use the bridge element:1. Touch the ON/OFF pad.2. Touch the bridge pad.3. Touch the INCREASE and/orDECREASE pads to choose thedesired heat setting. The display showsyour heat setting.NOTE: If you touch the INCREASE pad first thesurface unit will come on at the highest (H) heatsetting. If you touch the DECREASE pad first thesurface unit will come on at the lowest (L) heat setting.There are eleven heat settings ranging fromLow (L) to High (H) to choose from.4. To turn a surface unit off, touch theON/OFF pad again.BridgeCenterrearelementRightrearelementTouch thesepads to increaseor decrease theheat setting.These controlscannot be usedwhen the bridgesurface unit isbeing operated.Touch this pad touse both elementscombined with thebridge elementbetween them.Using thebridgesurfaceunitsseparatelyTo use each circular element separately:1. Touch the ON/OFF pad.2. Touch the INCREASE and/orDECREASE pads to choose thedesired heat setting. The display showsyour heat setting.NOTE: If you touch the INCREASE pad first thesurface unit will come on at the highest (H) heatsetting. If you touch the DECREASE pad first thesurface unit will come on at the lowest (L) heat setting.There are eleven heat settings ranging fromLow (L) to High (H) to choose from.3. To turn a surface unit off, touch theON/OFF pad again.NOTE: To use the right element separately use theright rear controls and touch the pad. To usethe center element separately use the centerrear controls.CenterrearelementRightrearelementTouch thesepads to increaseor decrease theheat setting.Touch this padto use the rightrear elementseparately.Touch thesepads to usethe centerrear elementseparately.