GE Digital Radiant Cooktop Owner's Manual

Also see for Digital Radiant Cooktop: Owner's manual Owner's manual Owner's manual Owner's manual and installation instructions Use and care guide

Contents

GE Digital Radiant Cooktop Owner's Manual Manual pdf 16 page image

16Glass Cooktop CleaningDigital Radiant CooktopBurned-onresidueWARNING: DAMAGE to your glass surface mayoccur if you use scrub pads other than BLUE Scotch-Brite® Multi-Purpose No Scratch scrub sponges by3M.1. Allow the cooktop to cool.2. Spread a few drops of Cerama Bryte® to theentire burned residue area.3. Using the scrub sponge, rub the residuearea, applying pressure as needed.4. If any residue remains, repeat the steps listedabove as needed.5. For additional protection, after all residuehas been removed, polish the entire surfacewith Cerama Bryte® and a paper towel.Normal dailyuse cleaningONLY use the the recommended cleaningcream, Cerama Bryte®, on the glass cooktop.Other creams may not be as effective.To maintain and protect the surface of your glasscooktop, follow these steps:1. Before you use the cooktop for the first time,clean it with cleaning cream. This helpsprotect the top and makes clean-up easier.2. Daily use of the cooktop cleaning cream willhelp keep the cooktop looking new.3. Shake the cleaning cream well. Apply a fewdrops of the cream directly to the cooktop.4. Use a paper towel or sponge to clean the entirecooktop surface.NOTE: It is very important that you DO NOT heatthe cooktop until it has been cleaned thoroughly.Clean your cooktop aftereach spill.Scotch-Brite® Multi-PurposeNo Scratch scrub spongeHeavy,burned-onresidueWARNING: DAMAGE to your glass surface mayoccur if you use scrub pads other than BLUE Scotch-Brite® Multi-Purpose No Scratch scrub sponges by3M.1. Allow the cooktop to cool.2. Spread a few drops of Cerama Bryte® to theentire burned residue area.3. Hold the razor scraper at approximatelya 45° angle against the glass surface andscrape the soil. It will be necessary to applypressure to the razor scraper in order toremove the residue.4. Keep a small amount of cream on the residueas you scrape.5. After scraping with the razor scraper, usethe scrub sponge to remove any remainingresidue.6. For additional protection, after all residuehas been removed, polish the entire surfacewith Cerama Bryte® and a paper towel.NOTE: Razor blade is packed inverted for safetyreasons. Prior to use, the blade must be rotated andreinserted into slot. Do not use a dull or nicked blade.The RAZOR SCRAPER is availablethrough our Parts Center. Seeinstructions under “To Order Parts”section on next page.