GE GBC12 Owner's Manual And Installation Instructions

LEVELING LEGSAdjustable legs at the front corners of the refrigeratorshould be set so the refrigerator is firmly positioned onthe floor, and the front is raised just enough that the doorcloses easily when opened about halfway.To adjust the leveling legs, turn the legs clockwise toraise the refrigerator, counterclockwise to lower it.If you have questions, call 1.800.561.3344 or visit our Website at: geappliances.ca.To raise the refrigeratorInstallation RefrigeratorInstructions Model GBC12BEFORE YOU BEGINRead these instructions completely and carefully.• IMPORTANT – Save these instructions forlocal inspector’s use.• IMPORTANT – Observe all governing codesand ordinances.• Note to Installer – Be sure to leave theseinstructions with the Consumer.• Note to Consumer – Keep these instructions forfuture reference.• Skill level – Installation of this appliance requires basicmechanical skills.• Completion time – Refrigerator Installation15 minutesReversing the Door Swing1 hour• Proper installation is the responsibility of the installer.• Product failure due to improper installation is not coveredunder the Warranty.REFRIGERATOR LOCATION• Do not install the refrigerator where the temperature willgo below 55°F (13°C) because it will not run often enoughto maintain proper temperatures.• Install it on a floor strong enough to support itfully loaded.• Do not install it closer than 5” (13 cm) next to a range.CLEARANCESFor optimal performance of your refrigerator, the followingclearances are recommended:• Sides 3/8” (0.9 cm)• Top 1” (2.5 cm)• Back 2” (5 cm)8INSTALLING THE HANDLESRemove the plug buttons from the left side of the doors.Install the handles using the screws provided, and snapscrew covers in place.