GE GDF510PxJ Series Technical Service Manual

Contents

GE GDF510PxJ Series Technical Service Manual Manual pdf 32 page image

– 32 –Top Control Console CoverTop Control Console Cover Removal1. Remove and separate the door.2. Remove the bottom cover, UI, light pipe andbuttons.3. Remove the top console and cover as anassembly. There are six 1/4 in. hex head screws,securing the assembly to the inner door (notethe length of the screws). A new cover shouldbe replaced in the event the cover is loose ormust be removed. The tabs are likely to break onremoval.Installing a New Top Cover1. The top cover is secured with sixteen tabs, andthe console has cutouts or slots to allow the topcover to click lock together.2. Position the tabs on the cover into the slots onthe console.3. Press the top and console securely together andslide the parts to engage the tabs into the slots.Start from one end and work across to the otherHQG$VHULHVRI¿YHDXGLEOHFOLFNVZLOOEHKHDUGas the cover and console snap together.Outer Door PanelOuter Door Panel ComponentsBar HandleThe Bar Handle is attached to the outer door panel.The handle is an assembly with end caps pre-attached.Bar Handle Removal1. Remove and separate the door.2. Remove the vent conduit (two 1/4 in. hex headscrews).3. Remove two 3/8 in. hex head, 1/4 -28 threadsize screws holding the handle.Six 1/4 in. hexhead screwsClose upview of tabs(reference point)Bar HandleHandle BracketsHandle ScrewsVent InsulationVent GasketVent ConduitGasketInsulationBadgePad(SS Inner DoorModels)Cross Brace(SS Inner DoorModels)CrossBraceScrews