OPERATING INSTRUCTIONSCYCLES ENERGY OPTIONSPOT-SCRUBBER NORMALWASH HEATED DRYON OFFOFF STARTSHORTWASHPLATEWARMER(PRESSHEATED DRY)RINSE & HOLDSelect Cycle/OptionBefore you Begin Starting the Cycle2 312 32CYCLES OPTIONSNORMALWASHPOT-SCRUBBERLIGHTWASHTEMPBOOSTONTEMPBOOSTOFFHEATEDDRY OFFHEATEDDRY ONOFFSHORTWASHSTART DELAY(HRS)START642531RINSE & HOLDPLATEWARMER(PRESSHEATED DRY)STATUSCYCLEON2 23Find your model. Locate your model number bylooking on the label fastened to the tub wall justinside the dishwasher door.Your dishwasher is designed to give maximumperformance on loads with normal and heavy soils.• Load dishware. (See Loadingsection.)• Make sure the Cycle Indicator Dialis at the OFF position and theCycle On light (on some models)is OFF.• Add detergent. (See DetergentDispensers and Detergent Guidesections.)• Check rinse agent level. (See RinseAgent section.)NOTE: If dishwasher drains into agarbage disposal, operate the disposaluntil it is empty before starting thedishwasher.*If you want to use a cycle on theDial go to Using the Cycles on theDial section.• Latch the door.• Select your desired wash cycleand (energy) options.NOTE: The light over the pads(on some models) comes ON whenpressed, to indicate the cycle/optionthat has been selected. Press padfirmly until light comes on. Theselights remain on while the door islatched.Turning the Cycle Indicator Dial toSTART will begin the cycleimmediately.NOTE: To obtain the benefits of acomplete cycle, be careful that youdo not turn the Dial any farther thanis necessary to start the dishwasher.There is a time delay between start-up and water fill so you will not hearany wash action right away.6GSC900 Features and appearance may varyGSC720 Features and appearance may vary