49-80764-2 23WARNING SHOCK OR BURN HAZARD: Before replacing oven light bulb, disconnect the electrical power to therange at the main fuse or circuit breaker panel. Failure to do so may result in electric shock or burn.CAUTION BURN HAZARD: The glass cover and bulb should be removed when cool. Touching hot glass withbare hands or a damp cloth can cause burns.Oven Light Replacement (on some models)To remove:7XUQWKHJODVVFRYHUFRXQWHUFORFNZLVHWXUQXQWLOthe tabs of the glass cover clear the grooves of thesocket. Wearing latex gloves may offer a better grip.8VLQJJORYHVRUDGU\FORWKUHPRYHWKHEXOEE\SXOOLQJit straight out.To replace:8VHDQHZYROWKDORJHQEXOEQRWWRH[FHHG50 watts. Replace the bulb with the same type of bulbthat was removed. Be sure the replacement bulb israted 120 volts or 130 volts (NOT 12 volts).8VLQJJORYHVRUDGU\FORWKUHPRYHWKHEXOEIURPLWVSDFNDJLQJ'RQRWWRXFKWKHEXOEZLWKEDUHILQJHUV2LOfrom skin will damage the bulb and shorten its life.3. Push the bulb straight into the receptacle all the way.4. Place the tabs of the glass cover into the grooves ofWKHVRFNHW7XUQWKHJODVVFRYHUFORFNZLVHWXUQFor improved lighting inside the oven, clean the glasscover frequently using a wet cloth. This should bedone when the oven is completely cool.5. Reconnect electrical power to the oven.Oven Light Replacement (on some models)To remove: 7XUQWKHJODVVFRYHUFRXQWHUFORFNZLVHWXUQXQWLOthe tabs of the glass cover clear the grooves of thesocket. Wearing latex gloves may offer a better grip.2. Remove the bulb by turning it counter-clockwise.To replace:1. Replace bulb with a new 40-watt appliance bulb.Insert the bulb and turn it clockwise until it is tight.2. Place the tabs of the glass cover into the grooves ofWKHVRFNHW7XUQWKHJODVVFRYHUFORFNZLVHWXUQFor improved lighting inside the oven, clean the glasscover frequently using a wet cloth. This should bedone when the oven is completely cool.3. Reconnect electrical power to the oven.CARE AND CLEANING: Oven LightOven Light8VHJORYHVor clothReceptacleG9 BulbSocketTabGlass coverReceptacle(on some models)