GE JCK 915 Owner's Manual

Also see for JCK 915: Manual Technical service guide

GE JCK 915 Owner's Manual Manual pdf 23 page image

Safety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips Consumer Support23Care and cleaning of the oven. www.geappliances.caBe sure electrical power is off and all surfaces are cool before cleaning any part of the oven.How to Remove Packaging TapeTo assure no damage is done to the finishof the product, the safest way to removethe adhesive left from packaging tapeon new appliances is an applicationof a household liquid dishwashingdetergent, mineral oil or cooking oil.Apply with a soft cloth and allow to soak.Wipe dry and then apply an appliancepolish to thoroughly clean and protectthe surface.NOTE: The plastic tape must be removed from allchrome trim. It cannot be removed if it is baked on.Oven Light BulbsNOTE: The glass cover should beremoved only when cold. Wearing latexgloves may offer a better grip.CAUTION: Before replacing youroven light bulb, disconnect the electricalpower to the oven at the main fuse orcircuit breaker panel.Be sure to let the light cover and bulbcool completely.For your safety, do not touch a hot bulbwith bare hands or a damp cloth.To remove:Turn the glass covercounterclockwise 1/4 turn untilthe tabs of the glass cover clear thegrooves of the socket.Using gloves or a dry cloth, removethe bulb by pulling it straight out.To replace:Use a new 130-volt halogen bulb,not to exceed 50 watts.Using gloves or a dry cloth, removethe bulb from its packaging. Do nottouch the bulb with bare fingers.Push the bulb straight into thereceptacle all the way.Place the tabs of the glass cover intothe grooves of the socket. Turn theglass cover clockwise 1/4 turn.For improved lighting insidethe oven, clean the glass coverfrequently using a wet cloth. Thisshould be done when the oven iscompletely cool.Reconnect electrical power tothe oven.BulbSocketTabGlass coverReceptacleUse glovesor clothReceptacle