GE JGB800DEP Owner's Manual & Installation Instructions

Also see for Appliances JGB810: Owner's manual and installation instructions Owner's Manual & Installation Instructions Owner's manual and installation instructions Owner's Manual & Installation Instructions Owner's manual

GE JGB800DEP Owner's Manual & Installation Instructions Manual pdf 16 page image

Operating Instructions Safety InstructionsInstallationInstructionsTroubleshooting TipsConsumer Support16Using the clock and timer.Not all features are on all models.To Set the ClockThe clock must be set to the correct time ofday for the automatic oven timing functionsto work properly. The time of day cannot bechanged during a timed baking or self-cleaning cycle.Touch the Clock pad.Touch the number pads.Touch the number pads the same way youread them. For example, to set 12:34, touchthe number pads 1, 2, 3 and 4 in that order.If number pads are not touched within oneminute after you touch the Clock pad, thedisplay reverts to the original setting. If thishappens, touch the Clock pad and reenterthe time of day.Touch the Start pad until the time ofday shows in the display. This entersthe time and starts the clock.To check the time of day when the displayis showing other information, simply touchthe Clock pad. The time of day shows untilanother pad is touched.To Set the TimerThe timer does not control oven operations.The maximum setting on the timer is 9 hoursand 59 minutes.Touch the Kitchen Timer On/Off pad.Touch the number pads until theamount of time you want shows in thedisplay. The maximum time that can beentered in minutes is 59. Times morethan 59 minutes should be changed tohours and minutes. For example, toenter 90 minutes as 1 hour 30 minutes,touch 1, 3 and 0 in that order.If you make a mistake, press the KitchenTimer On/Off pad and begin again.Touch the Start pad. After pressing theStart pad, Set disappears; this tells youthe time is counting down, although thedisplay does not change until oneminute has passed.When the timer reaches :00, the controlwill beep 3 times followed by one beepevery 6 seconds until the Kitchen TimerOn/Off pad is touched.The 6-second tone can be canceled byfollowing the steps in the Special featuresof your oven control section under Tonesat the End of a Timed Cycle.Make sure the clock is set to the correcttime of day.The timer is a minute timer only.The Clear/Off pad does not affectthe timer.Power OutageIf a flashing time is in the display, you haveexperienced a power failure. Reset the clock.Touch the Clock pad once to reset.Enter the correct time of day by touchingthe appropriate number pads. Touchthe Start pad.To Reset the TimerIf the display is still showing the timeremaining, you may change it by touchingthe Kitchen Timer On/Off pad and thentouching the number pads until the timeyou want appears in the display.If the remaining time is not in the display(clock, delay start or cooking time are inthe display), recall the remaining time bytouching the Kitchen Timer On/Off padand then touching the number padsto enter the new time you want.To Cancel the TimerTouch the Kitchen Timer On/Off pad twice.