~ Microwave OvenCooking by TimeThe TIME COOK feature allowsyou to preset the cooking time.The oven shuts off automatically.Power Level 10 is automatically setfor time cooking, but you maychange this for more flexibility.See your Cookbook.To become better acquainted withTIME COOK function, make a cupof coffee by following the stepsbelow.1!, Step 1: Fill a cup 2/3 full of waterand add 1 teaspoon of freeze driedcoffee. Use a cup that has no metaldecoration. Place cup in oven andclose door.\!Step 2: Touch TIME COOK. Thedisplay shows :0. Signal lightabove TIME COOK flashes. PowerLevel 10 is automatically set inoven, but does not appear indisplay.Step 3: Select your time. Touch1, 2 and O for a minute and 20 sec-onds. 1:20 and signal light aboveTIME COOK appear on display. Ifanother Power Level is desiredtouch POWER LEVEL and thenumber, although Power Level 10(HIGH) is preferred for this cup of. coffee.Step 4: Touch START. Timecounting down shows on display.Step 5: When time is up, ovensounds and oven, light, and fanshut off.Questionsand AnswersQ. I set my oven for the time calledfor in the recipe but at the end ofthe time allowed, my dish wasn’tdone. What happened?A. Since house power varies dueto time or location, ,many TimeCook recipes give you a time rangeto prevent overcooking. Set theoven for minimum time, test thefood for doneness, and cook yourdjsh a little longer, if necessary.Q. I want to cook my dish on aPower Level other than HIGH, whatdo I need to do?A. To change the Power Level,touch the POWER LEVEL pad afterentering desired cooking time.Enter the desired number and thentouch START.Q. Can I interrupt my Time Cookfunction to check the food?A. Yes. To resume cooking, simplyclose the door and touch START.NOTE: Microwave power will notcome on until you are ready. Youmust touch START for cooking tobegin.Q. I touched the number pads andselected my power level. When Itouched START, however, my ovendidn’t come on. Why not?A. The TIME COOK pad must betouched before setting the numberpads or else your oven will not be-gin cooking.Q. I tried to change Power Levelbut the display changed back tocooking time. Why?A. After touching Power Level padyou only have 4 seconds to enterthe number. Try setting controlsagain.10