GE JP3030D Installation Instructions Manual

Contents

6 31-11072-1Installation InstructionsINSTALLING THE COOKTOP1 VERTICAL CLEARANCEInstall an approved junction box where it will beeasily reached through the front of the cabinet wherethe cooktop will be located. The cooktop conduit is4 feet long.IMPORTANT: The junction box must be locatedwhere it will allow considerable slack in the conduitfor serviceability.3 ATTACH FOAM TAPEApply the foam tape around the outer edge of theglass. Do not overlap the foam tape.NOTE: On ZEU30 and ZEU36 models, apply thefoam tape around the outer edge of the glass on thesides and rear of the unit only.4 MOUNTING PARTSRemove the hold down brackets and screws from theliterature package.Screw the hold down bracket to the side of thecooktop unit. Repeat for opposite side of cooktop.2 PROTECT SURFACE OF COOKTOPPlace a towel or tablecloth onto the countertop. Laythe cooktop upside down onto the protected surface.Install junction box so that itcan be reached through thefront of the cabinet.16”Min.Bottom of CooktopCloth under CooktopBottom of CooktopFoam TapeCooktopGlassMounting ScrewHold DownBracketPre-Drilled HoleBottom of CooktopCooktop GlassFoam Tape